Paint Spray Booth Exhaust Filter 20x20x2 15Gr 50/Case +NESHAP 6H Compliant

Description

Made in the
U
S
A
.....not China for a change. Support American business! USA, USA, USA
Although everyone's filters appear to be the same as ours, there's no comparison. Our product has earned your seal of approval. Check the credentials in this category. Don't let a dollar or two cheaper price influence you if you want the best. 20"x20"x2.0" Standard Grade Paint Spraybooth Exhaust Filter Pads have a defined backing layer for support and final filtration.
20"x20"x2.0" Standard Grade Paint Spraybooth Exhaust Filter Pads
This offering is 50 Filters per case. NESHAP 40CFR63 HHHHHH compliant with 98%+ removal efficiency. This is the filter you need to assure your booth is 98% efficient through the filter to atmosphere according to EPA regulations.
Progressive Density featuring a 2.0" open face layer for maximum depth loading of paint overspray graduating to a final layer of high density glass fiber for product rigidity and unequaled strength. Referred to as "skin", this backing enhances the efficiency of the filter to keep emissions of solids to a minimum. This assures a clean fan and discharge stack. The 15 gram construction provides ample fibers to arrest paint particles.
These standard glass fiber exhaust filters are compression packaged to minimize shipping cost and reduce storage space.
Filter colors may vary and color does not effect the filtration performance of our product
Avoid EPA violations and citations that result in fines and possible business interruptions by using certified filters. If you aren't currently registered via the EPA notification due January 10, 2010, you're currently in violation of the law. Using cheap, non-certified filters can be an expensive mistake. Most of the Chinese filters found on Ebay are not compliant.
See our other store items for products that compliment this listing.
Shipping rates only apply to 48 continental United States.  All others - Alaska, Hawaii, Puerto Rico, etc.
MUST CALL FOR SHIPPING RATES.
Key Words:
Paint Pad Holding Grids, Spraybooth Intake Filters, Spraybooth Intake Pad and Frame, Ceiling Diffusion Filters, Color Corrected Light Tubes, Hazardous Location Light Fixtures, Odor and VOC Absorbant Filters, Bulk Fiberglass Floor Pit Filter Rolls, Door Seals, Replacement Paint Spray Booth Parts, NESHAP 40CFR63 HHHHHH.
Call our toll free Paint Spray Booth Hotline 888-376-8723 for products that don't appear here.
Made in the USA. These filters have been tested and comply with NESHAP 40 CFR63 HHHHHH and Underwriters Laboratory UL Class II.
WARNING!  Cheap products dumped in America are not compliant. Demand a performance report for products from a certified U.S. Testing Facility.  Support American business!